az_gila
Well Known Member
Guys,
I found this info. on the Molex web site.
Should be read by all doing their own crimping of Molex pins. Lots of info. and good pictures/diagrams.
http://www.molex.com/tnotes/crimp.html
...hope it helps gil in Tucson
PS as an EAA Tech. Counlr. I have found lots of electrical problems related to bad connections. These can be the most annoying, since everything will work at first, but then the plane gets intermittent failures due to the effects of vibration during it's first few years of service.
I found this info. on the Molex web site.
Should be read by all doing their own crimping of Molex pins. Lots of info. and good pictures/diagrams.
http://www.molex.com/tnotes/crimp.html
...hope it helps gil in Tucson
PS as an EAA Tech. Counlr. I have found lots of electrical problems related to bad connections. These can be the most annoying, since everything will work at first, but then the plane gets intermittent failures due to the effects of vibration during it's first few years of service.
