Van's Air Force
Don't miss anything! Register now for full access to the definitive RV support community.
TOOLS
- Thread starter treeman
- Start date
randylervold
moderator
I bought the 30" combo brake/shear/roller from Harbor Freight Tools for $299 and built mine with it.
Band saw
I bought a Grizzly Tool 14" band saw and put a bi-metal blade on it. Its 3000fpm so you have to only cut alum with it. It's too fast for steel. Home Depot has Rigid band saws that are almost the same for less than 400.00 if you wanted to save on shipping and get it right now. Aden
I bought a Grizzly Tool 14" band saw and put a bi-metal blade on it. Its 3000fpm so you have to only cut alum with it. It's too fast for steel. Home Depot has Rigid band saws that are almost the same for less than 400.00 if you wanted to save on shipping and get it right now. Aden
Kenny Gene
Well Known Member
Combo Brake/Shear
Randy,
I just bought a 30" brake from Harbor Freight for $59, but I did not see or know about a combo,,, I'm flying with about 135 hours, but maybe there will be another project in the future,,,,Can you post the link or cat number? Thanks
Kenny Gene
7A flying and Livin' The Dream!
Randy,
I just bought a 30" brake from Harbor Freight for $59, but I did not see or know about a combo,,, I'm flying with about 135 hours, but maybe there will be another project in the future,,,,Can you post the link or cat number? Thanks
Kenny Gene
7A flying and Livin' The Dream!
randylervold
moderator
Here's the one...
http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=5907
Wait for a sale, $299.
