View Full Version : GSA 28 Roll and Pitch Pushrod Hardware
Apparently this hardware is not provided....where have people been sourcing the needed hardware for the pushrod control arm assemblies? Is this another special kit not found in thew catalog?
08-26-2020, 08:18 PM
Yes it's a Garmin servo kit(s) for pitch and roll. 14 GARMIN AP SERVO INSTALL KIT$217.00
Chris, thanks. 217.00 that's crazy for those few parts!
08-27-2020, 10:11 AM
It sounds like you are looking for the Hardware Group/Installation Kit only (no brackets) for the GSA28 servo. It is $60 list price.
011-02952-00 - GSA 28 Servo Install Kit, generic without mounting bracket - $60.00
For a complete RV14 servo installation kit from VANS (like the other mentioned, I believe), you would need to get the bill of materials list from VANS to see what they include.
08-28-2020, 10:30 AM
Here's what the mounting kit looks like installed with the roll servo on my 14A. The upper two attachment points will deform to fit flush with the servo when initially tightened. I had to open-up the molex plug support slightly to clear the right servo stop.