Skyview servos

I'm wiring up my servos for a Skyview system. Instructions say to install a suitable breaker within reach of the pilot. My original plan was on the avionics buss which would be located on the co-pilot side but still within reach of the pilot. I do have the option to install the breaker on the main buss directly in front of the pilot. This would mean power to the servos during start up but I do not think this would be a problem for the servos.
What do you think of this plan?
Thanks

Ron,
The servos are designed to be on whenever the master is on if you wish. They won't be harmed by engine start or anything else. In my plane, the breakers for the servos are on the far right side of the panel.

Thanks, I was quite sure this was the case, just wanted to double check and I was too tired last evening to do a thorough search.
Ron